ATC-800+ Package 2 ** New Model **

ATC-800+ Package 2

The ATC-800 is a well known piece of equipment used by many people around the world as an all in one adjustable temperature controller.

Now introducing the updated version, the ATC-800+. Still the same accurate and reliable thermostat now with updated electronics and a wider temperature range of -19.9c to 99c.

The ATC-800+ Temperature Controller is a digital thermostat designed to control both heating and cooling devices at the same time. It will switch any devices on or off that are connected to it to help maintain the temperature you have set it to operate at.

The reliability and accuracy of this unit allows it to be used for many different applications including, aquariums, reptile keeping, brewing, food storage and many others.

Simply select the temperature that you wish to maintain using the large easy to read digital display. Place the waterproof temperature sensor, which is supplied on a 2 metre length of cable into the area you wish to control. Connect your devices and let the digital controller maintain the temperature range you require.

It works by switching on and off the heating and/or cooling circuits as required removing any hassle for you. The ATC-800+ with its low energy consumption has the ability to store all your settings so that even after a power cut it will continue to operate as per your original settings. No battery required.

Plastic Coated Sensor	Stainless Steel Sensor

Sensors that were supplied with the original ATC-800 are still compatible with the ATC-800+.

When buying you have the choice to purchase between 2 different sensors, both of which are waterproof, come complete with a rubber mounting sucker and can both measure air or liquid temperatures.

The Plastic Coated version is available and is recommended when using in liquid or damp environments, ideal for aquariums etc. You can also chose our Stainless Steel version if you prefer but there is no difference in performance between them. Please use the dropdown box below to make your selection when ordering.

The ATC-800+ can operate 240 Volt equipment with an excellent maximum load capacity of:

• Heating Circuit: 10 Amp and 2400 Watt
• Refrigeration Circuit: 20 Amp and 4800 Watt

We provide a comprehensive wiring diagram to assist you but we also provide an excellent aftercare service to answer any questions you may have. Simply email us any questions and we will answer them.

The ATC-800 was originally designed for fish keeping and is used all over the world very successfully. Due to the ATC-800+ versatility it can be used for many other applications. Its ability to control heating and cooling at the same time has made this unit a very popular device in industry where robust and accurate temperature control is extremely important.

The following section has been written to provide some additional information to assist fish and animal owners.

Temperature problems are a major cause of stress and loss to animal life. The ATC-800+ can save you a lot of time, effort and unnecessary expense by ensuring your temperature system is fully working and accurate.

This easy to use controller allows you to connect a heating and/or a cooling device (if desired) to your tank or fish room to help you maintain the exact temperature of the water.

The Plastic Coated temperature sensor is completely safe to use with either freshwater or marine setups and because it’s coated in plastic it will not rust. It also contains a removable sucker to allow you to attach it to the side of the tank if required.

Even using the ATC-800+ with just a heater has a number of advantages over regular aquarium heaters:

• Connect more than 1 heater to a tank eliminating cold spots giving you a better distribution of even heat.
  

• No awkward or fiddly dials to try and set your desired temperature. The ATC-800+ allows you to select the exact temperature on a digital display for all the heaters connected to it.
  

• Change the temperature settings easily from outside the tank.
  

• Place the sensing probe at any point in the tank. This means that the thermostats on your heaters that normally control the temperature won’t get a false reading from the heat being given off. This will ensure an accurate temperature is being read and that the heaters can supply the exact heat

The ATC-800+ is supplied in 3 different packages
for your convenience. All packages are available
from our shop.

Contents for ATC-800+ Package 2

The ATC-800+ unit, temperature sensor of your choice and a pre-cut robust mounting enclosure including a wall mounting kit. This package allows you to easily wire the ATC-800+ yourself as it contains the essential components and instructions. Having the enclosure means that the unit and the wires are safely contained and the wall mounting kit means you can finish this off by securely fitting it to a wall or board.

Side of ATC-800+	Back of ATC-800+
Package Number 3

Specifications

• Control Temperature Range: -19.9°C to 99°C (adjustable)
• Display Resolution: in 0.1°C
• Control Temperature Difference: 1 to 10°C (adjustable)
• Power Supply: 220V AC ± 10% 50Hz
• Heating Relay Capacity: 10A : 2400W (max) 240V AC
• Refrigeration Relay Capacity: 20A: 4800W (max) 240V AC
• Ambient Working Temperature Range: 0 to +60°C
• Working Humidity: 20% to 85%
• Accuracy: <±1°C
• Sensor: NTC Shielded Line
• Normal Consumption: <5W
• Compressor Delay Protection Time: 3 Minutes
• ATC-800+ Size: 18 x 10 x 6 cm (W x H x D)
• ATC-800+ Within Enclosure:19 x 12 x 6 cm (W x H x D)
• Sensor Cable Length: 2 metre

Click Below to Download as a PDF File

1. Manual
2. Wiring Instructions

We stock a number of different thermostats. If you would like to compare the different types we stock please use the following link which will direct you to our Quick Comparison Chart Web Page.

Quick Comparison Chart

If you have any further questions about our products please visit our support pages by clicking on the link below where you can also submit a question if required.

Support Website

This item is for
ATC-800+ Package 2